PrevOperation Theatre EquipmentsNextGynaecology

Physiotherapy

Shortwave Diathermy

Solid State Shortwave Diathermy, SSD 300
SSD 300

The Short-wave diathermic current is a High-Frequency alternating current which usually has a frequency of 27, 120,000 cycles per second and sets up wireless waves with a wave-length of 11 meters. The intensity of the current can be great enough to produce a direct heating effect on the tissues, similar to the heating effect of the current on any other conductor, and the term diathermy means 'through heating'.
The Principal effect of the short-wave diathermic current on the body is the production of heat in the tissues and the physiological effects result from the rise of temperature. Rise in temperature induces relaxation of muscles and increases the efficiency of their action. The increases blood supply ensure the optimum condition for muscle contraction.

FEATURES
No Vacuum tube, hence no recurring cost, minimum breakdown
High power Mosfet based design
Twin fan cooling system, Compact design
Light In weight as compared to conventional shortwave diathermy units
Smooth variable control for power selection up to 300watts
Digital Timer with Audible buzzer sound for treatment over

 

Technical Specification
FREQUENCY RANGE Shortwave
OUTPUT POWER 300 watts
INPUT POWER 750VA
POWER SUPPLY 220-240VAC, 50/60Hz
WEIGHT 12 kgs
TIMER 1-30mins (with audio buzzer for treatment over indication)
FUSE 5Amp
H.F. SOURCE MOSFET based circuit (No Vacuum tube)
GALVOTHERM 250
GALVOTHERM 250

Features
Specially Designed for Hospitals and clinics
Aesthetic Design
Digital Treatment Timer
5 step intensity control
Cooling fan
Table Model

 

  Technical Specification
  POWER OUTPUT   250W
  FREQUENCY   27.12 Mhz
  WAVE LENGTH   11 Mtrs.
  OPERATING MODE   CONTINUOUS
  SUPPLY   220-240 VAC, 50/60 HZ
  FUSE   5A
  H.F. SOURCE   VACUUM TUBE
  TIMER   DIGITAL
  WEIGHT   10 Kgs. Approx.

  Accessories
• Pair of PADS
• Pair of Cables
• Power Cord
• Dust Cover
GALVOTHERM 500
GALVOTHERM 500

Features
Specially Designed for Hospitals and clinics
Aesthetic Design
Digital Treatment Timer
5 step intensity control
Cooling fan
Trolley Model

  Technical Specification
  POWER OUTPUT   500W
  FREQUENCY   27.12 Mhz
  WAVE LENGTH   11 Mtrs.
  OPERATING MODE   CONTINUOUS
  SUPPLY   220-240 VAC, 50/60 HZ
  FUSE   10A
  H.F. SOURCE   VACUUM TUBE
  TIMER   DIGITAL
  WEIGHT   10 Kgs. Approx.

  Accessories
• Pair of PADS
• Pair of Cables
• Power Cord
• Dust Cover
• Disc Electrodes with Arms and Support (Optional)
GALVOTHERM 500 (CONT CUM PULSE)
GALVOTHERM 500 (CONT CUM PULSE)

Features

  • Specially Designed for Hospitals and clinics
  • Aesthetic Design
  • Digital Treatment Timer
  • 5 step intensity control
  • Cooling fan
  • Table Model

  Technical Specification
  POWER OUTPUT   500W
  FREQUENCY   27.12 Mhz
  WAVE LENGTH   11 Mtrs.
  OPERATING MODE   CONTINUOUS AND PULSE
  PULSE   20, 50, 100, 150, 200
  SUPPLY   220-240 VAC, 50/60 HZ
  FUSE   5A
  H.F. SOURCE   VACUUM TUBE
  TIMER   DIGITAL
  WEIGHT   10 Kgs. Approx.

  Accessories
• Pair of PADS
• Pair of Cables
• Power Cord
• Dust Cover
• Disc Electrodes with Arms and Support (Optional)

 
GALVOTHERM 1000 (CONT CUM PULSE)
GALVOTHERM 1000 (CONT CUM PULSE)

Features

  • Specially Designed for Hospitals and clinics
  • Aesthetic Design
  • Digital Treatment Timer
  • 5 step intensity control
  • Cooling fan
  • Trolley Model

  Technical Specification
  POWER OUTPUT   1000W
  FREQUENCY   27.12 Mhz
  WAVE LENGTH   11 Mtrs.
  OPERATING MODE   CONTINUOUS AND PULSE
  PULSE   20, 50, 100, 150, 200
  SUPPLY   220-240 VAC, 50/60 HZ
  FUSE   10A
  H.F. SOURCE   VACUUM TUBE
  TIMER   DIGITAL
  WEIGHT   10 Kgs. Approx.

  Accessories
• Pair of PADS
• Pair of Cables
• Power Cord
• Dust Cover
• Disc Electrodes with Arms and Support (Optional)

 

Shortwave therapy is the application of electromagnetic energy to the body at shortwave frequencies. At these Shortwave frequencies the electromagnetic energy is converted to thermal energy by the induction of circulating currents in the tissue and dielectric absorption in insulating tissue. Shortwave therapy units may produce output power levels of up to 500W for Continuous providing significant heating to the area of the body being treated and upto 1000w incase of pulse. For this reason the treatment is often called shortwave diathermy (through heating).

Shortwave therapy equipment normally uses the band centred on 27.12 MHz. This corresponds to a wavelength of approximately 11 metres. The benefits associated with the heating effect – encouragement of healing, pain relief, reduction of muscle spasm, increase in mobility etc.

The difference between shortwave therapy and other methods of heating is that it provides “deep heating”. Other techniques such as infrared therapy, hot-packs etc., provide the heat externally whereas shortwave therapy generates heat within the tissue.

PULSED SHORTWAVE DIATHERMY

It employs the same operating frequency as traditional SWD ie. 27.12MHz. The output from the machine is pulsed such that the ‘on’ time is considerably shorter than the ‘off’ time, thus the mean power delivered to the patient is relatively low even though the peak power (i.e. during the on pulses) can be quite high (peak power goes, go up to 500W / 1000W).

Continuous Passive Motion

CONTINUOUS PASSIVE MOTION 

  • Specially designed sturdy solid construction of high torgue motor for noise free operation.
  • Thigh-length adjustment
  • Foam-padded leg placement seat with straps
  • Indicator for Up-Down movement
  • Patient Safety Switch
  • Delay time in both flexion and extension

Technical Specification:

Flexion angle : 0 – 120
Delay time : 1 to 15 sec in steps of 5
Timer : 1- 60 min digital timer

INTERFERENTIAL THERAPY

IFT + MS + TNS
IFT + MS + TNS (COMBO UNIT) 

Model: IF-99E

Interferential therapy employs medium frequency currents used in 2 or 4-pole configurations to produce a low frequency stimulation effect. In order to produce the required stimulation, two medium frequencies are used. A constant frequency of, say, 4000 Hz is applied to one pair of electrodes and a slightly different frequency of say 3950 Hz is applied to the other pair. These two frequencies 'interfere' to produce an amplitude modulated medium frequency (beat frequency) in the tissue.

  • Micro-controller based
  • Combination of IFT, Muscle stimulator and Tense
  • 4 line LCD Display
  • Current modes available : 2 Pole, 4 Pole, 4 Pole V90, 4 Pole V45, Galvanic, Interrupted Galvanic, Faradic, Surge faradic, Tens
  • Aesthetic look, compact design, light weight, easy to use
  • Feather touch keys
  • 99 Pre-setted Programs ( 30 for IFT and 69 for MS, Tense )
  • Treatment timer
Technical Specification:

For IFT
Base : 0 – 150 Hz
Sweep : 0 – 100 Hz
Carrier : 4Khz
Treatment Modes : 2pole. 4pole, 4pole V90, 4pole V45
Spectrum : Triangular, Square, Trapezoidal
Output : 0 – 100 ma
For Muscle Stimulator and Tens
Galvanic : Plain Dc current
Interrupted Galvanic : Duration (ms): 300, 100, 30, 10, 3, 1, 0.3, 0.1, 0.03, 0.01
Faradic : 50Hz, 100Hz
Surge Faradic
Tens : 2, 5, 10, 20, 30, 50, 80, 100, 120, 150Hz

Modes : CONT, BURST(7sec On and 7sec Off), PWM(50-400us), FM
Combo Therapy, IFT + ULT
Combo Therapy, IFT + ULT

Model: IF-29U

Interferential therapy employs medium frequency currents used in 2 or 4-pole configurations to produce a low frequency stimulation effect. In order to produce the required stimulation, two medium frequencies are used. A constant frequency of, say, 4000 Hz is applied to one pair of electrodes and a slightly different frequency of say 3950 Hz is applied to the other pair. These two frequencies 'interfere' to produce an amplitude modulated medium frequency (beat frequency) in the tissue.

  • Micro-controller based
  • Combination of IFT, Ultrasound
  • 4 line LCD Display
  • Current modes available for IFT : 2 Pole, 4 Pole, 4 Pole vector, Russian
  • Modes available for Ultrasound : Cont, Pulse (3:4, 1:2, 1:4, 1:8, 1:12)
  • Aesthetic look, compact design, light weight, easy to use
  • Feather touch keys
  • 29 Pre-setted Programs
  • Treatment timer
Technical Specification:

Interferential
Carrier Frequency : 4 kHz
Base Frequency : 10 – 150Hz in steps of 10
Sweep Frequency : 10 – 100Hz in steps of 10
Mode : 2pole, 4pole, 4pole vector 90 deg, 4pole vector 45deg
Sweep Pattern : 1|1, 6|6 or 6^6
Vector : 10s, both channels
Output Channels : 2
Intensity : 0 – 100 adjustable
Russian Stimulation
Carrier Frequency : 2.5 kHz
Modulation Frequency : 50Hz
Surges : 1:1, 1:2
Output Channels : 1 or 2
Intensity : 0 – 100 adjustable
Ultrasound
Frequency : 1 MHz
Power Output : 2.5 w/cm2
Modes : Cont and Pulse Modes
Pulse Modes : 3:4, 2:3, 1:4, 1:8, 1:12
Dimension : 290 x 280 x 90mm
Weight : 5kgs
Input Supply : 170 – 240Vac, 50Hz
Interferential therapy unit LCD
INTERFERENTIAL THERAPY UNIT - LCD

Model: IF-50L

Interferential therapy employs medium frequency currents used in 2 or 4-pole configurations to produce a low frequency stimulation effect. In order to produce the required stimulation, two medium frequencies are used. A constant frequency of, say, 4000 Hz is applied to one pair of electrodes and a slightly different frequency of say 3950 Hz is applied to the other pair. These two frequencies 'interfere' to produce an amplitude modulated medium frequency (beat frequency) in the tissue.

  • Micro-controller based
  • 4 line LCD Display
  • Feather touch  keys
  • Selection of five stimulus current modes : 4 Pole, 2 Pole , 4 Pole V90, 4 Pole V45, Russian current
  • ABS Plastic shockproof cabinet
  • Aesthetic look, compact design, light weight, easy to use
  • 50 programs
  • Display of all parameters on the screen during treatment
  • Treatment timer
Technical Specification:

For IFT
Base : 0 – 150 Hz
Sweep : 0 – 100 Hz
Carrier : 4Khz, Russian
Treatment Modes : 2pole. 4pole, 4pole vector (90 Deg. & 45 Deg.)
Spectrum : Triangular, Square, Trapezoidal
Output : 0 – 100 ma
Intensity Balance : To equalise 2 channels
Display : Four Line LCD Display
Digital Timer : 0-99 Mins presettable
Power Supply : 220 Volts +/- 10%
Output Type : 100% Isolated
Cabinet : ABS Shock Proof

MUSCLE STIMULATOR

Multichannel (Four Channel)
MULTICHANNEL (FOUR CHANNEL)

Model: MS-04

Faradic pulses are of short duration (less than 1 ms) and have a repetition rate of 50 Hz. They are normally surged to produce rhythmical muscle contraction. Galvanic or direct current is used for pain relief and iontophoresis. Also a wide range of interrupted galvanic pulses are available.

  • Micro-controller based
  • Four channels – 8 pad unit
  • Independent intensity control for each channel
  • Current modes available : Faradic, Surge faradic, Int. Galvanic, Tens( Cont., Burst, PWM and FM ), Acupuncture
  • 4 line LCD display
  • Feather touch keys
  • ABS plastic shockproof body
  • Aesthetic look, compact design, light weight, easy to use
  • Can be used for Diagnostic as well as therapeutic purpose
  • Treatment timer
  • Intensity scale : 0 to 100

Technical Specification:

1) Intensity : 0 – 100, ADJUSTABLE
2) Display : 4 LINE LCD DISPLAY
3) Modes : INTERUPTED GALVANIC, FARADIC, SURGE FARADIC, TNS, ACUPUNCTURE
4) INT. Gal : FREQ : 1, 5, 10, 50, 100 Hz, DURATION : 0.01, 0.03, 0.1, 0.3, 1, 3, 10, 30, 100
5) Sur. Far : ON TIME : 1 – 10 SEC, OFF TIME : 1 – 10 SEC
6) TNS Freq. : 2, 50, 80, 100,150 Hz (Cont., Burst, PWM and FM)
8) Acupuncture : 2, 50, 80, 100,150 Hz
9) Faradic : 40 Hz
10) Resolution : 1 VOLT
11) Input : 230VAC ( MAINS OPERATED )
12) Weight : < 2 Kg
13) Dimension : 275mm x 200mm x 85mm
14) Pair Cable with Electrodes, Straps : 4 Pair
      Carrying Case : 1 no.
Diagnostic cum Therapeutic Stimulator (Single Channel)
DIAGNOSTIC CUM THERAPEUTIC (Single Channel)

Model: DSL-007

Faradic pulses are of short duration (less than 1 ms) and have a repetition rate of 50 Hz. They are normally surged to produce rhythmical muscle contraction. Galvanic or direct current is used for pain relief and iontophoresis. Also a wide range of interrupted galvanic pulses are available.

  • Micro-controller based
  • Current modes available : Faradic, Surge faradic, Galvanic, Int. Galvanic, Tens( Cont., Burst, PWM and FM ), Acupuncture
  • 2 line LCD display
  • Feather touch keys
  • ABS plastic shockproof body
  • Aesthetic look, compact design, light weight, easy to use
  • Can be used for Diagnostic as well as therapeutic purpose
  • Treatment timer
  • 99 Programs

Technical Specification:

1) Intensity : 0 – 120, ADJUSTABLE
2) Display : 2 LINE LCD DISPLAY
3) Modes : INTERUPTED GALVANIC, FARADIC, SURGE FARADIC, TNS, ACUPUNCTURE
4) INT. Gal : FREQ : 1, 5, 10, 50, 100 Hz, DURATION : 0.01, 0.03, 0.1, 0.3, 1, 3, 10, 30, 100
5) Sur. Far : ON TIME : 1 – 10 SEC, OFF TIME : 1 – 10 SEC
6) TNS Freq. : 2, 50, 80, 100,150 Hz (Cont., Burst, PWM and FM)
7) Acupuncture : 2, 50, 80, 100,150 Hz
8) Faradic : 40 Hz
9) Resolution : 1 VOLT
10) Input : 230VAC ( MAINS OPERATED )
11) Weight : < 2 Kg
12) Dimension : 275mm x 200mm x 85mm
13) Pair Cable with Electrodes, Straps : 1 Pair
      Carrying Case : 1 no.
Mini Muscle Stimulator (Single Channel)
MINI MUSCLE STIMULATOR (Single Channel)

Model: MS-01

Faradic pulses are of short duration (less than 1 ms) and have a repetition rate of 50 Hz. They are normally surged to produce rhythmical muscle contraction. Galvanic or direct current is used for pain relief and iontophoresis. Also a wide range of interrupted galvanic pulses are available.

  • Micro-controller based
  • Compact, Portable, Easy to use
  • Treatment timer : 0 – 99 min (Two seven segment display)
  • 20 Pre-setted Programs
  • Current modes available : Interrupted galvanic, Faradic, Surge Faradic
Mini Muscle Stimulator (Double Channel)
MINI MUSCLE STIMULATOR (Double Channel)

Model: MS-02

Faradic pulses are of short duration (less than 1 ms) and have a repetition rate of 50 Hz. They are normally surged to produce rhythmical muscle contraction. Galvanic or direct current is used for pain relief and iontophoresis. Also a wide range of interrupted galvanic pulses are available.

  • Micro-controller based
  • Compact, Portable, Easy to use
  • Treatment timer : 0 – 99 min (Two seven segment display)
  • 20 Pre-setted Programs
  • Current modes available : Interrupted galvanic, Faradic, Surge Faradic
  • Separate intensity control for each channel
Mini Muscle Stimulator with TNS (Single Channel)
MINI MUSCLE STIMULATOR with TNS (Single Channel)

Model: MST-01

Faradic pulses are of short duration (less than 1 ms) and have a repetition rate of 50 Hz. They are normally surged to produce rhythmical muscle contraction. Galvanic or direct current is used for pain relief and iontophoresis. Also a wide range of interrupted galvanic pulses are available.

  • Micro-controller based
  • Compact, Portable, Easy to use
  • Treatment timer : 0 – 99 min (Two seven segment display)
  • 30 Pre-setted Programs
  • Current modes available : Interrupted galvanic, Faradic, Surge Faradic, Tens
Mini Muscle Stimulator with TNS (Double Channel)
MINI MUSCLE STIMULATOR with TNS (Double Channel)

Model: MST-02

Faradic pulses are of short duration (less than 1 ms) and have a repetition rate of 50 Hz. They are normally surged to produce rhythmical muscle contraction. Galvanic or direct current is used for pain relief and iontophoresis. Also a wide range of interrupted galvanic pulses are available.

  • Micro-controller based
  • Compact, Portable, Easy to use
  • Treatment timer : 0 – 99 min (Two seven segment display)
  • 30 Pre-setted Programs
  • Current modes available : Interrupted galvanic, Faradic, Surge Faradic, Tens
  • Separate intensity control for each channel

TENS

Tens (Four Channel)
TENS (Four Channel)

Model: TNS-04

Transcutaneous electrical nerve stimulation (TENS) refers to the application of low-intensity, short-duration pulses for the purpose of relieving pain.

  • Micro-controller based
  • Modes available : Continuous, Burst, Sweep, PWM
  • Four different Frequencies available
  • 4 channels , 8 pads to cover a larger area with separate intensity controls
  • 4 line LCD display
  • Feather touch keys
  • ABS plastic shockproof body
  • Aesthetic look, compact design, light weight, easy to use
  • Treatment time : 0 – 99 min
  • 20 Programs

Technical Specification:

1) Outputs : 4 Channels
2) Frequency : 2, 50, 80, 100, 130, 150 Hz
3) Modes : Continuous, Burst (7 sec on, 7 sec off), FM (2-10-20-30-50-80-100-120-150 Hz),
PWM (variable pulse width of 100-350 µs)
4) Waveshape   Biphasic
5) Timer   0-99 min
6) Intensity   0-100 Adjustable
7) Supply   220-240 VAC, 50/60Hz
Mini Tens (Single Channel)
MINI TENS (SINGLE CHANNEL)

Model: MT-001

Transcutaneous electrical nerve stimulation (TENS) refers to the application of low-intensity, short-duration pulses for the purpose of relieving pain.

  • ABS plastic shockproof body
  • Aesthetic look, compact design, light weight, easy to use
  • Intensity control with Switch
  • Variable Frequency
  • Battery as well as mains operated(optional)

Mini Tens (Double Channel)
MINI TENS (DOUBLE CHANNEL)

Model: MT-002

Transcutaneous electrical nerve stimulation (TENS) refers to the application of low-intensity, short-duration pulses for the purpose of relieving pain.

  • ABS plastic shockproof body
  • Aesthetic look, compact design, light weight, easy to use
  • Intensity control with Switch
  • Independent intensity controls for both channels
  • Variable Frequency
  • Battery as well as mains operated(optional)

Ultrasound Therapy Unit

ULTRASOUND THERAPY UNIT 

Model: ULT-10

Micro-controller based, Feather Touch, Digital System
Uses of ultrasound include facial and body skin rejuvenating treatments, reduction of stretch marks, treatment of contracture and scar tissue such as around breast implants, and the pre- and post-operative treatment of plastic surgery patients to accelerate healing and recovery after procedures such as face lifts, tummy tuck, and liposuction.

 Built in 2 line LCD module with backlight
 Menu includes continuous mode and pulse mode with
3:4, 2:3, 1:2, 1:4, 1:8, 1:12
 42 programs
 Computerized panel design with soft touch switches for comfort in operation
 User friendly, simple and easy to operate
 Built in clinical programs

 

Technical Specifications

 

 Display  16 X 2 LCD
 Output Timer  2.5 W/cm2
 Input Supply  230 VAC, 50 Hz
 Modes  Continuous and Pulse
 Timer  0 – 99 MIN
 Pulse Frequency  8, 48, 100 Hz
 Duty Cycle  10, 20, 50 %
 Frequency  1MHz

 

Standard Accessories:
• Light Weight Sound Head with Cable
• Available with Carrying Case

Ultrasound Therapy (1 and 3 MHz)

ULTRASOUND THERAPY UNIT 

Model: ULT-103

Micro-controller based, Feather Touch, Digital System
Uses of ultrasound include facial and body skin rejuvenating treatments, reduction of stretch marks, treatment of contracture and scar tissue such as around breast implants, and the pre- and post-operative treatment of plastic surgery patients to accelerate healing and recovery after procedures such as face lifts, tummy tuck, and liposuction.

 Built in 2 line LCD module with backlight
 Menu includes continuous mode and pulse mode with
3:4, 2:3, 1:2, 1:4, 1:8, 1:12
 42 programs
 Computerized panel design with soft touch switches for comfort in operation
 User friendly, simple and easy to operate
 Built in clinical programs

 

Technical Specifications

 

 Display  16 X 2 LCD
 Output Timer  2.5 W/cm2
 Input Supply  230 VAC, 50 Hz
 Modes  Continuous and Pulse
 Timer  0 – 99 MIN
 Pulse Frequency  8, 48, 100 Hz
 Duty Cycle  10, 20, 50 %
 Frequency  1MHz and 3MHz

 

Standard Accessories:
• Light Weight Sound Head with Cable
• Available with Carrying Case

Wax Bath

WAX BATH 

  • SS frame on top
  • Double walled
  • Insulated steel tank with cover
  • Moving on castors
  • Automatic Thermostat control
  • Three step Power Control
  • Lamp indicator for Mains and Thermostat
  • Wooden frame on top
  • Powder coated outer cover

WAX

  • Special Quality Medical Wax
  • Available in multiples of 5 kg Packs

Models:

Small   Size : 9” x 9” x 7”               Weight : 12 kg
Medium   Size : 12” x 12” x 8”               Weight : 12 kg
Large   Size : 22” x 16” x 12”             Weight : 20 kg

Traction Unit (Cervical cum Lumber)

TRACTION UNIT (CERVICAL CUM LUMBER) 

Model: TRAC-183

  • Advanced Micro controller based design
  • Static, intermittent, combi modes
  • Specially designed Gear box to give long life to the unit
  • Noiseless , Reliable and durable heavy duty Motor to pull appropriate weight
  • 2 line big LCD display
  • Patient safety switch
  • Audible buzzer sound to indicate treatment over

 
Technical Data:

Weight : 5 to 45 kgs ( till 90 kgs if doubler is used )
Rest time : 1, 5, 10, 15, 20, 25, 30 sec
Hold time : 20, 30, 40, 50, 60, 70, 80, 90 sec
Input : 220-240 Vac , 50/60 Hz
Weight : Approx. 10 Kgs.

Traction Table

TRACTION TABLE 

  • Powder coated Mild steel frame
  • Two section table ( One movable section and other section is fixed )
  • Foam mattress for patient comfort
  • Facility to attached lumber belt, chest belt
  • Platform to place traction unit

 

Shoulder Wheel

SHOULDER WHEEL 

  • Chrome plated for long life
  • Tension / resistance control
  • Can be used for Shoulder as well as Wrist
  • Adjustable bar length
  • Easy mounting on wall

 

Infrared, Ultravoilet Lamp

INFRARED, ULTRAVOILET LAMP 

A] TABLE MODEL

  • Angle adjustment facility
  • Light weight, Easy to use
  • Selection switch for IR and UV
  • Protective grill to avoid accidents

B] FLOOR MODEL

  • Multiple angle, Direction, Height adjustment Facility
  • Movable on castors
  • Selection switch for IR and UV
  • Protective grill to avoid accidents

Optional: Digital Timer to set treatment time for safe and effective treatment

 

Laser Therapy

LASER THERAPY 

Model: LT-650

Laser Therapy is a form of phototherapy which involves the application of monochromatic light over biological tissue to elicit a bimodulative effect within that tissue.

Distinct effects which are known to occur when using Laser Therapy :
• Growth factor response within the cells and tissue as a result of increased ATP and protein synthesis.
• Improved cell proliferation & Change in cell membrane permeability to calcium uptake.
• Pain relief as a result of increased endorphin release & Acupuncture point stimulation.
• Increased serotonin and Suppression of nociceptor action.
• Strengthening the immune system response via increasing levels of lymphocyte activity through a newly researched mechanism termed photo modulation of Blood.

Features:

  • Micro controller based
  • LCD display to make the unit more user friendly
  • Feather touch keypad
  • Safety key lock
  • Shockproof, Elegant, Light weight ABS cabinet
  • Fixed Programs for continuous and pulse
  • Treatment timer
  • 50 Programs
Technical Data:

Laser beam Class : 3B
Laser type : Semiconductor GaAs
Modes of operation : Continuous, Pulse upto 5 Khz
Wave length : 650 nm
Maximum Probe power : 40 mw
Power density : 0.8 w/cm2
Max energy within 1 min : 1 Joule
Beam surface : 0.025 cm2

Massager

MASSAGER 

  • Four different attachments
  • Specially designed handle for easy use
  • Works on 230 Vac Supply
  • Two speed Options

Body Shape - Slimmer

BODY SHAPE – SLIMMER

Available models: 8 pads unit, 16 pad unit and 24 pad unit

BODY SHAPE is a revolutionary new product, especially designed for professional and personal use in clinics, gyms, hospitals and at home, giving relaxing and pleasant treatment for a dream figure. It is effortless and time saving method to give exercise to your muscles in a smooth and safe way, which is called a “passive exercise”.

The unit has a versatile treatment selection. It has 13 programs to select from, which are INCH LOSS, FAT LOSS, LIFTING, TONING, RESHAPING, MASSAGING, RELIEF, FIRMING, FIGURE CORRECTION, ALL MODE AND THREE TENS PROGRAMS FOR PAIN RELIEF.

 Micro-controller based
 4 line LCD display
 Shockproof and Elegant ABS cabinet
 Light weight, compact and easy to use
 Feather touch Keypad
 Separate intensity controls for all channels
 Treatment Timer

 

Technical Specifications
 Power supply  230VAC, 50 Hz
 Wave Shape  Biphasic
 No. of Channels  04 / 08 / 12
 No. of Pads  8 / 16 / 24
 Output Voltage  100V peak to peak (max.)
 Display  20 X 4 LCD Display (Blue background & white text)
 PROGRAMS  13 ( Thirteen )
 Timer  0 – 99 min
 Size  275 x 200 x 85mm